2021 Sinbosen newest High quality 4 channel sound system 1300w DSP FP10000q module power amplifier DSP10000q
2021 Sinbosen newest High quality 4 channel sound system 1300w DSP FP10000q module power amplifier DSP10000q
2021 Sinbosen newest High quality 4 channel sound system 1300w DSP FP10000q module power amplifier DSP10000q
2021 Sinbosen newest High quality 4 channel sound system 1300w DSP FP10000q module power amplifier DSP10000q
2021 Sinbosen newest High quality 4 channel sound system 1300w DSP FP10000q module power amplifier DSP10000q
2021 Sinbosen newest High quality 4 channel sound system 1300w DSP FP10000q module power amplifier DSP10000q
Model
DSP10000Q

Item specifics

8Ω Stereo Power
1300WX4CH
4Ω Stereo Power
2100WX4CH
Certification
CE ROHS
Function
FP10000q with DSP function
Power type
Switching power supply
Special service
OEM service offered
Warranty
3 Years
Voltage
110V/220V
Amplifier Type
Professional DSP Power Amplifier
For
Dual/Single 15 inch line array speaker
Class
Class TD Power Amplifier
Channels
4 channesl power amplifier

Product review

B***z
2021-05-17 00:05

Great amp very reliable And clean sound

Description

Product Description
2021 Newest High Quality Amplifier 4 Channel 1300w DSP FP10000Q Module Power Amplifier DSP10000Q

●4 Channel Class TD Switching power amplifier with DSP

●4 x 2,100 Watts into 4 Ohms,4 x 1,300 Watts into 8 Ohms

●Create SUPER sound quality

●Control the sound effect by Touch on front 4" LED display screen

Or control the sound effect by Computer

●Simple DSP software,no need install,easy operate it

●Bridge-mode operation for Touring Applications

●Comprehensive protection scheme

●Use Original Siemens high quality capacitor 12pcs 3300uf 200V +4pcs 2200uf 200V

●Use Original ONSEMI transistor

●Original Neutrik XLR*/Speakon connectors

●Extended heatsink board to 95 mm

●Temperature protection;Over current protection;Short circuit protection built-in


Software control
Multiple power amplifier controls
Touch screen
Amplifier built-in processor,4 inch size led screen can touch,control the amplifier sound effect
DSP amplifier also control by PC,through software can more precise adjustment dsp processor
One PC can independent control several dsp amplifier at the same time
Why choose DSP Power Amplifier?
1. Built-in 96KHz sampling frequency, 24-bit A / D and D / A conversion, 32-bit floating point DSP chip processor with active frequency division, delay processing, EQ tuning, equalization and other functions (including the longest delay Up to 1 second. The crossover frequency, slope and slope can be adjusted. The balanced frequency, gain and bandwidth can be adjusted. There are PEQ and Hi-Shelf modes available.

2.4-inch LED color touch screen, simple and intuitive user interface, user-friendly operation of the amplifier easier.

3. With a professional PC control software, remote real-time control via USB or RS485 interface, the output can be freely rectangular distribution.

4. Balanced input and output, with high-pass low-pass filter feedback.

5 perfect protection features, including soft-start power supply, DC overload short circuit, overheating, ultra-high frequency, clipping and limiting protection circuit

6. Excellent cooling system, using high efficiency short toothed widened thickened heat sink, the output transistor to maintain the same temperature, the thermal performance of several times more than ordinary radiators.
8 ohm Stereo Power (RMS)
1300 W x 4 CH
4 ohm Stereo Power (RMS)
2100 W x 4 CH
8 ohm Bridged Power (RMS)
4200WX2
4 ohm Bridged Power (RMS)
5000WX2
Frequency Response(+o/-0.3dB,1W/8Ω)
20 Hz - 34 kHz
THD 20 Hz - 20 kHz for 1W
<0.1%
Signal-to-Noise Ratio
>112 dBA
Channel separation (Crosstalk) at 1 kHz
>70 dB
Input Connectors (per channel)
3 pin XLR, electronically balanced
Output Connectors (per channel)
Binding Posts 2-pole
Operating voltage, 220V / 110V nominal
180-240 V / 90-130 V selectable
Class
TD
TourClass Protection
ACL, IGM, AutoRamp, short circuit, DC voltage, turn on/off transient, current inrush, sub/ultrasonic input
Voltage Gain(dB)
23, 26, 29, 32, 35, 38, 41, 44 dB selectable
Input impedance
20 kOhm
Level adjustment (per ch.)
Front panel potentiometer, 31 positions detented from -inf to 0 dB
DSP Series are 4 in 4 out digital processing module boards, aiming at professional amplifier. The DSP chips of them are 32 bit floating point, 96KHz sampling frequency, 24 bit A/D & D/A converter.Embedded ARM processor operating system with 4" touch screen makes operation more easy. Free drive USB and RS485 can connect to the PC,meanwhile RS485 for distance control as long as 1500 meters supports machines' cascade. There are 8 bands PEQ,X Over, Delay, Limiter, Gain, Polarity for every output channel, limiting and adjusting the output level to protect the output equipments.
DSP10000Q Feedback
DSP10000Q makes the party atmosphere better
The DSP10000Q Amplifier Was Used For Motor Union Event In Korea