New design 1200w 1 u class D digital K-1200 power amplifier with 2 channel
- Model
- K-1200
Item specifics
- Stereo/output power 8Ω /1KHz
- 1200Wx2
- Stereo/output power 4Ω /1KHz
- 1850Wx2
- Bridge/output power 8Ω 1/KHz
- 3600W
- Bridge/output power 4Ω /1KHz
- 5000W
- THD（10% -1KHz）
- <0.1%
- Net weight
- 3.8Kg
Review
Description
Specification
Stereo/output power 8Ω /1KHz: 1200Wx2
Stereo/output power 4Ω /1KHz: 1850Wx2
Stereo/output power 2Ω /1KHz: 2300Wx2
Bridge/output power 8Ω 1/KHz: 3600W
Bridge/output power 4Ω /1KHz: 5000W
Frequency Response（8Ω/ 100mS/second）: 20Hz-20KHz±1dB
THD(10% -1KHz): <0.1%
Speed rate(1KHz): >20V/μs
Noise insulation factor(1KHz): >250
Dynamic range: ≥95dB
Signal-to-noise ratio: ≥95dB
Input sensitivity (1KHz): 2Vrms
Input impedance: 20K(balance)/ 10K(imbalance)
Net weight: 3.8Kg
Class D amplifier is developed by the best engineers and professional musicians. You will find the Class D amplifier are cost-effective, stable, and fully protected amplifiers.
Class D digital power amplifiers are popular among users at home and abroad because of their environmental protection, energy saving, small size and utilization rate of more than 97%. Products are sold in Europe, America and other countries.
Performance characteristics:
1. Volume step control.
2. Balanced input XLR stereo (two channels), stereo and bridge modes of operation.
3. Independent limiting, overload, overheating and short protection circuit.
Features: safety performance:
1: Use NTC boot soft start.
2: With PFC automatic voltage regulator circuit.
3: Each channel has independent overpressure and overheating.
4: load short-circuit protection.
5: There is an automatic limiting function to prevent damage to the sounder.
