2 In 6 out professional audio digital speaker manage processor BDX PA2

Min. Order 1 piece
Terms of Payment Western Union, MoneyGram, T/T, Paypal
Update Time 2020-09-29
Item specifics
Typedsp digital audio processor
ApplicationConcert, stage, KTV, Home Theatre
Power SupplySwitching Power Supply
Warranty2 years
Number of Channels2 input 6 output
Power Requirements25w
Frequency Response20 Hz–20 kHz(±0.5dB)
2 In 6 out professional audio digital speaker manage processor BDX PA2 
The PA2 digital audio processor has two inputs and six outputs. The front ends of both inputs include a 28-segment graphic equalizer with a total of 2.7 seconds of digital delay resources. PA2 digital audio processor design engineers understand the needs of users, designed a new generation of peripherals. From now on, only one piece of equipment is needed from the mixer to the amplifier, a controller that includes all the basic peripheral functions.

The PA2 provides full bandpass and crossover configurations as well as independent output processing and a full time RTA for live sound applications. 

    All New Setup Wizard
  • Streamlined AutoEQ™
  • All New AFS™ (Advanced Feedback Suppression)
  • Compression
  • Graphic EQ
  • 8-Band Parametric EQ (adjusted when using the AutoEQ) Input
  • Subharmonic Synthesis
  • Crossover (supports full range, 2-way, and 3-way systems)
  • 8-Band Parametric EQs (used for speaker tunings) Output
  • Limiting
  • Driver Alignment Delays
    The PA2 processor is the most effective way to manage all aspects of post mixer processing and signal routing. It becomes the only device that you will need between the mixer and the power amps.


    Type : PA2 digital audio processor
    Input : (2) line inputs. (1) RTA Mic input
    Input Connectors : (2) Female XLR line inputs. (1) Female XLR RTA Mic input
    Input Type : Electronically balanced/RF filtered
    Input Impedance : >50 kohm
    CMRR : > 45dB
    Mic Preamp Phantom Power : +15VDC (RTA)
    Mic Preamp Equivalent Input Noise (EIN) : < -117dB, 22Hz-22kHz, 150 ohm (RTA)
    Output : (6) Line Outputs
    Output Connectors : Male XLR
    Output Type : Electronically balanced, RF filtered
    Output Impedance : 120 Ω
    Max Output : +20dBu
    A/D Dynamic Range : 112 dB A-weighted, 110 dB unweighted
    Type IV Dynamic Range : 123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW
    Input Delay Length : 100ms
    Alignment Delay : 10ms per channel (60ms total)
    Sample Rate : 48kHz
    Dynamic Range : >110 dB A-weighted, >107dB unweighted
    THD+Noise : 0.003% typical at +4dBu, 1kHz, 0dB input gain
    Frequency Response : 20Hz – 20kHz, +/- 0.5dB
    Interchannel Crosstalk : < -110 dB, -120dB typical (input-to-output: < -100 dB)
    Operating Voltage : 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz
    Power Consumption : 22 W
    Dimensions : 4.4cm (H) x 14.6cm (D) x 48.26cm (W)
    D/A Dynamic Range : 112 dB A-weighted, 110dB unweighted

    Client feedback