2 × 4 mm² × 25 m NL2-to-NL2 Speaker Cable
- Model
- 2×4×25M-NL2
Review
Description
NL2 to NL2 locking connectors — twist-lock 2-pole mating at both ends, stays seated under stage vibration and repeated plug cycles.
Full 4 mm² per core — low DC resistance across the full 25 m span; less voltage drop, heat and low-end compression on full-range and sub runs.
2 × 4 mm² × 25 m finished lead — one run from amp to cabinet, no mid-run splice, no field cutting or re-termination.
Orange spec sleeves + ID number at both ends — 2×4×25M, NL2 ⇄ NL2 and a line number printed on each end; check spec and count stock without unrolling the coil.
