digital processor Pro loudspeaker China digital audio dsp
digital processor Pro loudspeaker China digital audio dsp
digital processor Pro loudspeaker China digital audio dsp
digital processor Pro loudspeaker China digital audio dsp
digital processor Pro loudspeaker China digital audio dsp

Item specifics

2 Line Inputs, 1 RTA Mic input
6 Line Outputs
Frequency Response
20Hz- 20kHz, +/- 0.5dB
Power Consumption
25 W
Input Type
Electronically balanced/RF filtered
Input Impedance
>40k ohm



With more settings and enhanced circuitry, the easiest way to improve the sound of your PA system is with the management system.

Input    (2) line inputs. (1) RTA Mic input
Input Connectors    (2) Female XLR line inputs. XLR RTA Mic input
Input Type    Electronically balanced/RF filtered
Input Impedance    >40k ohm
Max Input    >+20dBu
CMRR    > 45dB
Mic Preamp Phantom Power     +15VDC (RTA)
Mic Preamp Equivalent Input Noise (EIN)    < -117dB, 22Hz-22kHz, 150 ohm (RTA)
Output    (6) Line Outputs
Output Connectors    Male XLR
Output Type    Electronically balanced, RF filtered
Output Impedance    120ohm
Max Output     +20dBu
Alignment Delay    10ms per channel (60ms total)
A/D Converter    dbx Type IV™ Conversion System
A/D Dynamic Range    110 dB A-weighted, >107 dB weighted
Type IV Dynamic Range    123 dB with transient material, A-weighted,
 22kHz BW; 121 dB with transient material, 
unweighted, 22kHz BW; 115 dB typical with program material,
 A-weighted, 22kHz BW
Sample Rate    48kHz
D/A Dynamic Range112 dB A-weighted, 110dB unweighted
Dynamic Range    >110 dB A-weighted, >107dB unweighted
THD+Noise    0.004% typical at +4dBu, 1kHz, 0dB input gain
Frequency Response    20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk    < -110 dB, -120dB typical (input-to-output: < -100 dB)
Operating Voltage    100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz
Power Consumption    25 W
Unit Weight    5.5 lbs. (2.5 kg)
Shipping Weight    7 lbs. (3.18 kg)
Dimensions    1.75" (4.4cm) H x 5.75"(14.6cm) D x 19" (48.26cm) W


 Setup Wizard Steps Through Speaker and Amp Selection and Levels
 Auto EQ™ Wizard with 28-Band RTA Tunes Your System For The Venue
 AFS™ Wizard Helps Eliminate Feedback
 Stereo Feedback Elimination with 12 feedback notch filters
 120A Sub-harmonic Synthesizer
 Classic Input Compression
 JBL® Speaker and Crown® Power Amp Tunings included
 Full time RTA function
 Front-Panel Output Mutes
 Pink Noise Generator (used with Auto EQ and Auto Level Wizards)
 Linked Stereo DSP Processing for ease of use
 24-Bit ADC/24-Bit DAC, >113 dB Dynamic Range
 2-Channel XLR Input and 6-Channel XLR Output
 2x3, 2x4, 2x5, 2x6 Crossover Configurations
 Dual 28-band Graphic EQ- Linked or Dual Mono
 Stereo Multi-band Parametric EQ
 Stereo Output Limiters
 Output Alignment Delay
 Power on/off Mute Circuitry
 Front-panel RTA-M XLR input with phantom power
 25 User Programs/25 Factory Programs
 Full Graphic LCD Display
 Front Panel Input and Output Meters
Drive Rack PA system processor
loudspeaker manager system
digital audio PA system processor
crossover processor
audio digital processor