- Amplifier Type
- Digital Power Amplifier
- Stereo/output power 4Ω/1KHz
- Stereo/output power 8Ω/1KHz
- Bridge/output power 8Ω/1KHz
- THD（10% -1KHz）
- 2 channels amplifier
- Class d power amplifier
- Net weight
- 3 Years
- OEM service
Class D digital power amplifiers are popular among users at home and abroad because of their environmental protection, energy saving, small size and utilization rate of more than 97%. Products are sold in Europe, America and other countries. You will find the Class D amplifier is cost-effective, stable, and fully protected amplifiers.
✔ Volume step control.
✔ Balanced input XLR stereo (two channels), stereo and bridge modes of operation.
✔ Independent limiting, overload, overheating and short protection circuit.
- Each channel has independent overpressure and overheating.
- Load short-circuit protection.
- There is an automatic limiting function to prevent damage to the sounder.
✔ Use NTC boot soft start.
✔ With PFC automatic voltage regulator circuit.
K1200 Digital Amplifier Specifications
Stereo/output power 8Ω /1KHz: 1200Wx2
Stereo/output power 4Ω /1KHz: 1850Wx2
Stereo/output power 2Ω /1KHz: 2300Wx2
Bridge/output power 8Ω /1KHz: 3600W
Bridge/output power 4Ω /1KHz: 5000W
Frequency Response（8Ω/ 100mS/second）: 20Hz-20KHz±1dB
THD(10% -1KHz): <0.1%
Speed rate(1KHz): >20V/μs
Noise insulation factor(1KHz): >250
Dynamic range: ≥95dB
Signal-to-noise ratio: ≥95dB
Input sensitivity (1KHz): 2Vrms
Input impedance: 20K(balance)/ 10K(imbalance)
Net weight: 3.8Kg
Stereo/output power 8Ω/1KHz
Stereo/output power 4Ω/1KHz
Stereo/output power 2Ω/1KHz
Bridge/output power 8Ω/1KHz
Bridge/output power 4Ω/1KHz
One Guyana customer says: "I have been a sound system engineer for quite some time now an this is one of the best 1u amplifiers I ever use.....really does what it said ..and I also wanna say thanks for the reliable service."
1200w dgiat amplfier
class d amplifiedigital amplifier class d
digital amplier dsign
digital design amplfer forsale