D4-3000 Class D amp digital amplifier 6500W 2 ohms stable
D4-3000 Class D amp digital amplifier 6500W 2 ohms stable
D4-3000 Class D amp digital amplifier 6500W 2 ohms stable
D4-3000 Class D amp digital amplifier 6500W 2 ohms stable
D4-3000 Class D amp digital amplifier 6500W 2 ohms stable
D4-3000 Class D amp digital amplifier 6500W 2 ohms stable
Model
D4-3000

Item specifics

Channel
4 Channel
Feature
1U/Digital Amp/2 Ohms Stable
8Ω Stereo Power (RMS)
3,000W X 4CH
4Ω Stereo Power (RMS)
5,000W X 4CH
2Ω Stereo Power (RMS)
6,500W X 4CH
Warranty
3 Years
Amplifier Type
Professional Digital Power Amplifier

Review

Description

D4-3000 FEATURE:
●4 Channel Class D Digital power amplifier 
●Mini 1U size,convenient for Touring Applications
●Suit for Top speaker, full range speaker,Line array;
●Work Under 2Ω steadily ! 
●Precise and Reasonable circuit structure
●Bring supper reliable sound
●Bridge-mode operation
●Original Neutrik XLR*/Speakon connectors
●Temperature protection;Over current protection;Short circuit protection built-in
 D SERIES HIGH POWER DIGITAL AMPLIFIER (DSP can be added)
ModelD2-3000D2-3500D2-4200D4-2000D4-3000
EIAJ Test Standard,1 kHz, 1% THD8Ω/Stereo2 x 3000W2 x 3500W2 x 4200W4 x 2000W4 x 3000W
4Ω/Stereo2 x 5000W2 x 6300W2 x 7800W4 x 3400W4 x 5000W
2Ω/Stereo2 x 7140W2 x 7400W2 x 8500W4 x 4760W4 x 6500W
8Ω/Bridge1 x 10200W1 x 12500W1 x 15600W2 x 6800W2 x 10000W
4Ω/Bridge1 x 14280W1 x 14800W1 x 17000W2 x 9520W2 x 13000W
Alternating Current Power Supply
PowerPFC Power
Rated power demand100-240V±10%, 50/60Hz
Operation voltage90V-270V
Power correction factor cos(φ)>0.95 @ >500W
Standby47W and 0.8A
Gain,Sensitivity32dB,35dB,38dB,41dB
Maximum Output Voltage/Current185V/85A (370V in the BRIDGE MODE)
Power Comsumption230V (115V in the BRIDGE MODE)
Temperature
Environment temperature0°-45C / 32′-113*F
Cooling systemTunnel through cooing system
Performance
Frequency Response20Hz - 20kHz (1W@8Ω,+05 dB)
Signal-to-Noise Ratio>110 dBA (20 Hz- 20 kHz A weighted)
Crosstalk>66 dB @ 1 kHz
Input Impedance10 kΩ balanced
Total Harmonic Distortion(THD)<0.5% from 1 W to full power (Typitcal value<0.05%)
Intermodulation Distortion(IMD)<0.5% from 1 W to full power (Typical value< 0.05%)
Damping Factor (8 ohms)>5000 @ 20-200 Hz
Slew Rate50V/μs @ 8Ω
Front Panel
Indicator LED/per channelOne PCS Green LED: the input signal of XLR ≥ -40dB;
Four pieces Green LED:
display the output signal(-20dB,-10dB,-5dB,-3dB)of SPEAKON
1 piece dual LED(Yellow and Red):
Protective state/Clip stste/Over heat/Over load
Power SwitchPress "I"-on; Press "O"-off.
Dust-proofTwo pieces dust-proof cotton,
it can take off to clean from the bottom of front pannel
Application
Signal in-connection4 Channel: One balanced XLR(with lock)female per channel;
2 Channel One balanced XLR(with lock)female
and one balanced XLR male per channel.
Signal out-connectionOne SPEAKON per channel connect to loudspeakers
Power cordFited to the device, and the CSA(cross sectional area)of the cord is 3 x 2.5mm²,
and the card is 1.5 meters long.
Multiple-Functions SwitchTwo Sensitivity Switches. One Mode Switch and one Clip Switch.
Structure(The size and weight depend on different series and shipping demand )
Dimensions482 x 44 x 380mm³/482 x 44 x 470 mm³
Net weight10Kg/12kg
Packing size580 x 580 x 119mm³/615 x 615 x 119 mm³
Shipping weight12Kg/14Kg
FRONT PANEL FEATURE
REAR PANEL FEATURE
Dimensions and Cooling System
NOTE:
The size is 437mm inside of the device(without the cover plate and front panel).The size is 
around 472mm of the complete device,but a little bit different size in the different front 
panel.Some series with different size that had not shown, please learn it in the parameter.


Tunnel through cooling system
Cold air comes in from the front panel of the equipment, forms a duct through the radiator 
to take the heat away and out from the rear panel of the equipment.