Sinbosen High-grade pa speaker dual 12 inch 3 ways line array speakers outdoor professional event
- Model
- KA-2
Item specifics
- Type
- 3 way audio line array system
- Usable bandwidth (-10 dB)
- 35 Hz-20 kHz
- Maximum SPL
- 147 dB
- RMS Power (LF)
- 2 x 12",450W
- IImpedence
- 8Ω
Review
Description
Specification | |
Type | 3-way, dual 12", bi-amp |
Usable bandwidth (-10 dB) | 35 Hz – 20 KHz |
Maximum SPL1 | 147 dB |
Nominal directivity (-6 dB) | Horizontal : 110° / 70° symmetric ; 90° asymmetric |
| Vertical : depends on the number of elements and array curvature. |
LF: 2 × 12″ cone drivers | |
RMS handling capacity | MF: 4 × 6.5″ cone drivers |
| HF: 2 × 3″ diaphragm compression drivers |
| LF: 2 x 500 W MF: 320 W HF: 160 W |
Nominal impedance | LF : 2 x 8 Ω; MF : 8 Ω; HF : 16 Ω |
Acoustical load | LF: Bass-reflex, Progressive vent design MF: Bass-reflex ; HF: Waveguide |
Connectors | 2 x 8-point PA-COM |
Captive 4-points rigging system | |
Rigging and handling | 2 large side handles |
| Inter-enclosure angles : 0.25, 1, 2, 3, 4, 5, 7.5 or 10° |
Cabinet | First grade Russian birch plywood, high density polyethylene |
Finish | Dark Grey brown |
Dimension | 1338 x 354/286 x 400 mm 52.7 x 14/11.3 x 15.8 in |
Weight (net) | 56kg / 123lb |
FEATURE OF KA-2
Sinbosen Dual 12" 3-Way Audio Line Array Speakers
Made of first grade Russian birch plywood.
The surface is coated with polyurea paint, which is anti-corrosion, waterproof and wear-resistant.
Steel grating and Rigging components are also high-grade steel with anti-corrosion coating.
The front is wrapped in acoustically neutral 3D fabric.
Built-in two 8Ω 450W 12 inch neodymium woofers, four 8Ω 320W 6.5 inch midrange and three 16Ω 160W 3 inch tweeters!
KA-2 adds some user-friendly designs like:
The inter-enclosure angles can be adjusted and you can replace speakers without disassembly!
Made of first grade Russian birch plywood.
The surface is coated with polyurea paint, which is anti-corrosion, waterproof and wear-resistant.
Steel grating and Rigging components are also high-grade steel with anti-corrosion coating.
The front is wrapped in acoustically neutral 3D fabric.
Built-in two 8Ω 450W 12 inch neodymium woofers, four 8Ω 320W 6.5 inch midrange and three 16Ω 160W 3 inch tweeters!
KA-2 adds some user-friendly designs like:
The inter-enclosure angles can be adjusted and you can replace speakers without disassembly!
Yellow fluorescent label.
