Sinbosen High-grade pa speaker K2 dual 12 inch 3 ways line array speakers outdoor professional event
- Model
- K2
Item specifics
- Type
- 3 way audio line array system
- Usable bandwidth (-10 dB)
- 35 Hz-20 kHz
- Maximum SPL
- 147 dB
- RMS Power (LF)
- 2 x 12",450W
- IImpedence
- 8Ω
Review
Description
K2 Specification |
||||
|
Type
|
K2 3 way audio line array system
|
|||
Usable bandwidth (-10 dB) | 35 Hz – 20 kHz ([K2 70]) | |||
Maximum SPL | 147 dB (preset [K2_70]) | |||
Nominal directivity (-6 dB) | Horizontal : 110° / 70° symmetric ; 90° asymmetric (35°/55° or 55°/33°) Vertical : depends on the number of elements and array curvature. | |||
Transducers | LF: 2 × 12″ cone drivers MF: 4 × 6.5″ cone drivers HF: 2 × 3″ diaphragm compression drivers | |||
Power Handling and Impedance | LF: 2 x 12",450W,2×8Ω Neodymium magnet MF: 4 x 6.5",320W,8Ω HF: 2 x 3",160W,16Ω | |||
Acoustical load | LF: bass-reflex, L-Vents MF: bass-reflex HF: DOSC waveguide, Panflex | |||
Connectors | IN: 1 x 8-point PA-COM LINK: 1 x 8-point PA-COM | |||
Rigging and handling | Captive 4-points rigging system 2 large side handles Inter-enclosure angles : 0.25, 1, 2, 3, 4, 5, 7.5 or 10° | |||
Cabinet | First grade Russian birch plywood, high density polyethylene Front steel grill with anti-corrosion coating acoustically neutral 3D fabric | |||
Finish | Dark Grey brow/ black | |||
Dimension | 1338 x 354/286 x 400 mm 52.7 x 14/11.3 x 15.8 in | |||
Weight(net) | 56kg / 123lb | |||
Specification
FEATURE OF K2
Sinbosen K2 Dual 12" 3-Way Audio Line Array Speakers
Made of first grade Russian birch plywood.
The surface is coated with polyurea paint, which is anti-corrosion, waterproof and wear-resistant.
Steel grating and Rigging components are also high-grade steel with anti-corrosion coating.
The front is wrapped in acoustically neutral 3D fabric.
Built-in two 8Ω 450W 12 inch neodymium woofers, four 8Ω 320W 6.5 inch midrange and three 16Ω 160W 3 inch tweeters!
K2 adds some user-friendly designs like:
The inter-enclosure angles can be adjusted and you can replace speakers without disassembly!
Sinbosen K2 Dual 12" 3-Way Audio Line Array Speakers
Made of first grade Russian birch plywood.
The surface is coated with polyurea paint, which is anti-corrosion, waterproof and wear-resistant.
Steel grating and Rigging components are also high-grade steel with anti-corrosion coating.
The front is wrapped in acoustically neutral 3D fabric.
Built-in two 8Ω 450W 12 inch neodymium woofers, four 8Ω 320W 6.5 inch midrange and three 16Ω 160W 3 inch tweeters!
K2 adds some user-friendly designs like:
The inter-enclosure angles can be adjusted and you can replace speakers without disassembly!
Made of first grade Russian birch plywood.
The surface is coated with polyurea paint, which is anti-corrosion, waterproof and wear-resistant.
Steel grating and Rigging components are also high-grade steel with anti-corrosion coating.
The front is wrapped in acoustically neutral 3D fabric.
Built-in two 8Ω 450W 12 inch neodymium woofers, four 8Ω 320W 6.5 inch midrange and three 16Ω 160W 3 inch tweeters!
K2 adds some user-friendly designs like:
The inter-enclosure angles can be adjusted and you can replace speakers without disassembly!
Two 12 inch neodymium woofers(Detail1)
Two 12 inch woofers
(Detail2)
Three 6.5 inch midrange
Yellow fluorescent label.
The label won't show if it hangs properly, on the contrary, if it's not hung properly, you will see a prominent yellow fluorescent label
Angle adjustment pin.
Insert the angle adjustment pin into the corresponding angle of 0.25, 1, 2, 3, 4, 5, 7.5 or 10°: the cabinet will automatically adjust！
